Wood spoon forming machine specifications and operation

WOOD SPOON FORMING MACHINE SPECIFICATIONS AND OPERATION 

Wood spoon forming machine is used for making wooden spoons as 3D cup spoons. It has the gas-liquid pressurized cylinder and takes compressed gas as a power source, making use of compression section area ratio of the booster and Pascal principle of conservation of energy, which achieves the air pressure up to the number of times. then it is more easier to mold semi-finished cutlery products into end products by mould.

Wood spoon forming machine is one kind of manufacturing machines widely used in the wooden product factories. The manufacturing machine operation procedure as following:

1.     Connect source gas: 0.5-0.7MPa

2.     Power:AC380V

3.     Machine start

4.     Setting temperature 0-999 degree

5.     Setting squeeze time 0-30 second

6.     Setting pressurization time 0-30 second

7.     Put wood spoon semi-finished product into machine

8.     Twist hand valve, put the mould with wood spoon into forming machine press fit place. Start pressing button, the machine begin to work

9.     After pressing, Twist hand valve to push out final product.

Except making wooden spoons machine, our company can also offer manicure sticks making machine, if you are interested in it, please do not hesitate to contact us.