Nail making machine application tips

The nail making machine is mainly used to make various nails. With other auxiliary equipment, it can make nails and cement nails. The nail making machine has simple structure, small size, stable performance, convenient maintenance and low energy consumption. 1. Before the application of nail making machine
The nail making machine uses three-phase electricity to ensure the driving force of the entire equipment. The site takes a set of machinery and equipment as an example, which needs to be about 70 square meters. Manpower 1-two people.
2. When the nail making machine is used
The installation site should be dry, clean and tidy, so that the equipment has a good natural environment, and the waste and debris on the equipment should be removed in time to prevent adverse reactions. Small and medium-sized nail making machines must be equipped with a mechanical wrench, and it is the most common type of screw on the machine.
When the nail making machine produces nails of different lengths, it needs to replace the abrasives. Small and medium-sized nail making machine equipment, a type of nail machine can produce different types of nails. Therefore, we should choose according to our needs when making nails.
The early operation method of the nail making machine is to set up the incoming line control rocker. During the operation, it is necessary to control the incoming line or terminate the incoming line at any time according to the actual operation requirements of the equipment.
3. After nail making machine application
After the nail making machine makes nails, if the nails are found to be of different lengths, or the nail caps and nail points are not good, you should search for the cause in time. If the problem is unclear, you must contact the professional technicians of the manufacturer for specific guidance. Dailies in Tinkering Work.